Posts Tagged ‘trigger enhancement’

After nearly four years of research, testing, and evaluation, D-Rmor Gear is proud to announce the release of their newest innovation: the “NY-0” trigger spring upgrade.

For many years, countless Glock shooters have known the secret to an improved trigger- the NY-1 trigger spring module and a minus connector. Providing an enhanced feel and greater reliability (since the original coil tension spring is one of the few parts known to fail), the NY-1 was not without drawbacks- namely, a significantly heavier trigger pull (between 6.5# and 7.8#), even when combined with a “minus” connector.

Some shooters, trying to return to a lighter pull, remove the spring from the housing altogether, thus guaranteeing imminent failure, as polymer alone is not sufficient to survive the many tens of thousands of compression and extension cycles required of this vital component.

In the process of developing an improved alternative, D-Rmor Gear went through dozens of different springs, experimenting with a variety of materials and spring rates, until a customized solution was arrived at.

The result: the D-Rmor Gear “NY-0” trigger spring upgrade. Designed to eliminate the drawbacks of the NY-1, and provide the shooter with the best trigger pull attainable. Now you can have it all:

-Optimized pull weight (5.1# to 6.4# with “-” connector depending on individual weapon/Gen)
-Enhanced reliability (no coil tension spring to break)
-Refined trigger feel- similar to a fine DA revolver
-Maintains the option of “staging” the trigger, something lost when using the NY-1
-Authoritative reset- makes shooting from the reset much easier

Made from the finest US-sourced music wire, and coated with the industry-leading anti-corrosion treatment, these springs will last a lifetime of shooting.

After trying EVERY aftermarket trigger available, D-Rmor Gear’s recommended “best practices” is as follows:

-Innovative Gunfighter Solutions Enhanced Duty Trigger: http://innovativegunfightersolutions.com/categories/glock/enhanced-duty-trigger.html

-D-Rmor Gear “NY-0” spring upgrade

-OEM NY-1 Trigger Spring Housing: https://www.lonewolfdist.com/Detail.aspx?PROD=541

-OEM Minus Connector: http://glockparts.com/Detail.aspx?PROD=6648

OR

-Lone Wolf Distributors “Long Minus” 721 Connector: https://www.lonewolfdist.com/Detail.aspx?PROD=921751

The “NY-0” spring upgrade represents one of the simplest and least expensive upgrades you can make to your Glock-compatible trigger. Compatible with all models and generations of Glocks and Glock-compatible pistols.

**Pricing is as follows**

$5 per spring
5 for $20
10 for $30

Pricing includes delivery with tracking anywhere in the USA*. To order, contact us with the quantity you would like to purchase. Payment by cash or check only.

Make the upgrade today!

*Note: pricing is for spring(s) only, shooter must already have NY-1 spring housing.

Installation by armorer/gunsmith recommended. It is up to individual shooter to determine the suitability of this upgrade for their own safety and shooting requirements.

“GLOCK” is a federally registered trademark of GLOCK, Inc and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.m.b.H. Neither D-Rmor Gear nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK compatible parts.

Advertisements